Tile, Stone and Grout Cleaning / Sealing
The 3 step tile stone and grout cleaning process
We use the follwing process to eliminate all dirt grease and grime from your hard surfaces (Click the three images below for a larger view)
- Step 1: pre condition entire hard surface to break down dirt grime and grease
- Step 2: agitate entire surface with special brushes
- Step 3: powerfully rinse and extract all dirt grease and grime
Before and After
Tile Sealing
Nichols carpet cleaning recommends sealing your stone or grout after cleaning (pictured below). The sealers help make your stone or grout resistant to spills and stains and easier to clean in the future. Also helping the stone or grout stay clean longer.
Contact Us now for your free estimate!
Regular Tile, Stone and Grout Maintenance
- Sweep or vacuum the area regularly to remove loose dirt, dust, and debris.
- Use a dry, microfiber dust mop for fine particles and to prevent scratching on the surface.
- Damp mop with a mild pH-neutral cleaner to clean the surface regularly. Avoid acidic or abrasive cleaners.
Stone-Specific Tips
- Use pH-neutral cleaners for stone surfaces to avoid damage.
- Avoid abrasive brushes or scouring pads on natural stone to prevent scratching.
- Regularly check and reseal natural stone surfaces to protect them from stains and moisture.
General Tile and Grout Cleaning Tips
- Test cleaners in a small area before use to avoid damage.
- Ensure good ventilation, especially when using commercial cleaners or products with strong odors.
- Wear appropriate protective gear when using cleaners, such as gloves and eye protection.
- Follow the manufacturer's recommendations for cleaning and maintenance based on the specific characteristics of your tiles and stones.
Nichols Carpet Cleaning is based out of Dublin CA, and provides service in Dublin, Livermore, Pleasanton, Danville, San Ramon, Alamo, Blackhawk, Ruby Hill, and the Tri - Valley region in California
©2023 Nichols Carpet Cleaning | Privacy | Licensed, Insured | 925-803-7641